● Single chip USB to asynchronous serial data transfer interface.
● Entire USB protocol handled on the chip. No USB specific firmware programming required.
● Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
● Fully integrated USB termination resistors.
● Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
● Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
● 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
● FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
● Unique USB FTDIChip-ID™ feature.
● Configurable CBUS I/O pins.
● Transmit and receive LED drive signals.
● UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
● FIFO receives and transmits buffers for high data throughput.
● Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
● Device supplied pre-programmed with unique USB serial number.
● Supports bus powered, self-powered and high-power bus powered USB configurations.
● Integrated +3.3V level converter for USB I/O.
● Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
● True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
● Configurable I/O pin output drive strength.
● Integrated power-on-reset circuit.
● Fully integrated AVCC supply filtering - no external filtering required.
● UART signal inversion option.
● +3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation.
● Low operating and USB suspend current.
● Low USB bandwidth consumption.
● UHCI/OHCI/EHCI host controller compatible.
● USB 2.0 Full Speed compatible.
● -40°C to 85°C extended operating temperature range.
● Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).