Transistors - FETs, MOSFETs - Single MOSFET P-CH 100V 19A TO-220AB IRF9540 is the third generation Power MOSFETs from Vishay.
7622
Nov 10, 2021
Nigel Frances
How to use MOSFETs IRFZ44N , IRF9540
Transistors - FETs, MOSFETs - Single MOSFET P-CH 100V 19A TO-220AB
IRF9540 is the third generation Power MOSFETs from Vishay. This article will unlock more details about IRF9540. There is a huge range of Semiconductors, Capacitors, Resistors and ICs in stock. Welcome RFQ!
IRF9540
IRF9540 Symbol
IRF9540 Footprint
IRF9540 3D Model
The IRF9540 is a P channel MOSFET transistor with switching and amplification capabilities. The transistor can drive a maximum load of -19A with a load voltage of -100V, and a maximum load of -76A in pulse mode.
The transistor has a fast switching rate as well as a low drain-to-source resistance. The transistor's fast switching speed might be advantageous in cases where the designer needs to switch the system or load in nanoseconds to avoid disconnection in the derived circuit. Low drain to source resistance, on the other hand, decreases power loss and improves transistor efficiency.
• Dynamic dV/dt Rating
• Repetitive Avalanche Rated
• P-Channel
• 175 °C Operating Temperature
• Fast Switching
• Ease of Paralleling
• Simple Drive Requirements
• Compliant to RoHS Directive 2002/95/EC
Uninterrupted Power Supplies
Switching Regulator Applications
Battery Charger and BMS Circuits
Solar Related Applications
Motor Driver Applications
Higher Power Transistor Driver Applications
The equivalent for IRF9540:
2SJ380
2SJ464
2SJ412
IRF9540PBF
SIHF9540
Vishay Siliconix IRF9540 technical specifications, attributes, parameters and parts with similar specifications to Vishay Siliconix IRF9540.
Vishay Siliconix IRF9540 technical specifications, attributes, parameters and parts with similar specifications to Vishay Siliconix IRF9540.
| Product Attribute | Attribute Value | |
|---|---|---|
| Mount | Through Hole | |
| Mounting Type | Through Hole | |
| Package / Case | TO-220-3 | |
| Number of Pins | 3Pins | |
| Supplier Device Package | TO-220AB | |
| Weight | 6.000006g | |
| Current - Continuous Drain (Id) @ 25℃ | 19A Tc | |
| Drive Voltage (Max Rds On, Min Rds On) | 10V | |
| Number of Elements | 1 Element | |
| Power Dissipation (Max) | 150W Tc | |
| Turn Off Delay Time | 34 ns | |
| Operating Temperature | -55°C~175°C TJ | |
| Packaging | Tube | |
| Published | 2011 | |
| Part Status | Obsolete | |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Product Attribute | Attribute Value | |
|---|---|---|
| Max Operating Temperature | 175°C | |
| Min Operating Temperature | -55°C | |
| Voltage - Rated DC | -100V | |
| Current Rating | -19A | |
| Number of Channels | 1Channel | |
| Element Configuration | Single | |
| Power Dissipation | 150W | |
| Turn On Delay Time | 17 ns | |
| FET Type | P-Channel | |
| Rds On (Max) @ Id, Vgs | 200mOhm @ 11A, 10V | |
| Vgs(th) (Max) @ Id | 4V @ 250μA | |
| Input Capacitance (Ciss) (Max) @ Vds | 1400pF @ 25V | |
| Gate Charge (Qg) (Max) @ Vgs | 61nC @ 10V | |
| Rise Time | 73ns | |
| Drain to Source Voltage (Vdss) | 100V | |
| Vgs (Max) | ±20V |
| Product Attribute | Attribute Value | |
|---|---|---|
| Fall Time (Typ) | 57 ns | |
| Continuous Drain Current (ID) | -19A | |
| Gate to Source Voltage (Vgs) | 20V | |
| Drain to Source Breakdown Voltage | -100V | |
| Input Capacitance | 1.4nF | |
| Drain to Source Resistance | 200mOhm | |
| Rds On Max | 200 mΩ | |
| Nominal Vgs | -4 V | |
| Height | 9.01mm | |
| Length | 10.41mm | |
| Width | 4.7mm | |
| REACH SVHC | Unknown | |
| Radiation Hardening | No | |
| RoHS Status | Non-RoHS Compliant | |
| Lead Free | Contains Lead |
The IRF9540 can be utilized for high-speed switching, as well as general-purpose switching and amplification. The transistor is utilized in the same way as any other general-purpose MOSFET.
It is best not to use any transistor at its maximum ratings or limits for long-term performance, and the same is true for the IRF9540 transistor. Because the maximum drain to source current is -19A, no-load greater than -15.2A should be applied. Because the maximum drain to source voltage is -100V, do not drive loads more than -80V, use an appropriate heatsink with the transistor, and store or use the transistor at temperatures between -55 and +150 ℃
IRF9540 Package
Vishay’s product portfolio is an unmatched collection of discrete semiconductors (diodes, MOSFETs, and optoelectronics) and passive components (resistors, inductors, and capacitors). These components are used in virtually all types of electronic devices and equipment in the industrial, computing, automotive, consumer, telecommunications, military, aerospace, and medical markets. Vishay is proud to be a major partner with Digi-Key.
Download datasheets and manufacturer documentation for IRF9540
TAGS
Comments