LMR400 Coaxial Cables (RF) 50Ohms[Video]:Datasheet, Features, and Applications

Times Microwave's LMR-400 is designed for adaptability, low loss, RF shielding, and wearability. The LMR-400 has the narrowest bend radius of any cable of comparable size and performance due to its cable architecture. The cable has the lowest loss of any comparable cable. This cable offers 90 dB of RF shielding and is ideal for EMI-prone environments. The LMR-400 is suitable for both indoor and outdoor use. Use Times Microwave's LMR-400 cable for any application that necessitates a low-loss, conveniently routed RF cable (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas). The LMR-400 cable can be used in place of an RG-8 cable.

Overview of LMR400’s Specifications

• LMR400 is a 50 Ohm coaxial cable that is structurally and materially similar to RG58 but has a 2.74mm Dia Inner Conductor.

• The Inner Conductor of the LMR400 is a solid bare copper-covered steel (BCCS).

• LMR400 is a coaxial cable with two shields. Aluminum tape is used for the outer shield, while tinned copper is used for the Overall Braid.

• Priced Per Foot

• Cable Type: LMR-400

• Impedance: 50 ohm

• Center Conductor: Bare Copper Covered Aluminum (BCCAI)

• Jacket: Polyethylene (PE)

• Outer Diameter: .405 inch

• Indoor/Outdoor Rated

• Drop-in replacement for RG-8

• Attenuation @ 900 MHz/100 ft: 3.9dB/100ft

• Attenuation @ 2.4 GHz/100 ft: 6.65dB/100ft

• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable

• Max Continuous Length: 1000 FT

Amphenol Times Microwave Systems LMR-400 technical specifications, attributes, parameters and parts with similar specifications to Amphenol Times Microwave Systems LMR-400.

LMR400 Electrical Specifications

LMR400 Environmental Specifications

• Wireless communication systems

• Drop-in replacement for RG8/9913 air-dielectric type cable

• Short antenna

• Feeder runs

• Easily routed, low loss RF cable.

Times Microwave Systems is a leader in coaxial transmission line technology and production. They provide a broad range of RF and microwave transmission line solutions for military, aerospace, wireless communications, and industrial applications. Their engineering expertise and range of manufacturing capabilities are highly regarded in the industry. With production facilities in the US and China, they can address both specialized applications with extremely demanding performance requirements and high volume commercial applications at frequencies from a few kHz to 110 GHz. As an Amphenol company since 2009, Times Microwave Systems has access to the resources of one of the largest manufacturers of interconnect products in the world. Amphenol Corporation designs manufacture and markets electrical, electronic, and fiber-optic connectors, interconnect systems, and coaxial and specialty cable.