Transistors - Bipolar (BJT) - Single TRANS NPN 80V 0.5A TO-92 The MPSA06 is an 80V 500mA general purpose NPN transistor with a maximum gain value of 100. This post covers its datasheet, equivalent and more detailed information about MPSA06.
3426
Nov 3, 2021
Edith Fowler
Tribute - Slayer Exciter 1.5W - MPSA06 2N3055 signal boosted variant
Transistors - Bipolar (BJT) - Single TRANS NPN 80V 0.5A TO-92
The MPSA06 is an 80V 500mA general purpose NPN transistor with a maximum gain value of 100. This post covers its datasheet, equivalent and more detailed information about MPSA06. There is a huge range of Semiconductors, Capacitors, Resistors and ICs in stock. Welcome RFQ.
MPSA06
| Quantity | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.24848 | $0.25 |
| 10+ | $0.23442 | $2.34 |
| 100+ | $0.22115 | $22.12 |
| 500+ | $0.20863 | $104.32 |
| 1000+ | $0.19682 | $196.82 |
MPSA06 Pinout
|
Pin Number |
Pin Name |
Description |
|
1 |
Emitter |
Current Drains out through emitter, normally connected to ground |
|
2 |
Base |
Controls the biasing of the transistor, Used to turn ON or OFF the transistor |
|
3 |
Collector |
Current flows in through collector, normally connected to load |
MPSA06 Symbol
MPSA06 Footprint
MPSA06 3D Model
The MPSA06 is a general-purpose NPN transistor that's frequently used in amplifiers. With a current of less than 500mA, the transistor can switch voltages up to 80V, making it ideal for low-power switching applications. It has a gain of 100 and is frequently used in audio amplifier circuits.
This NPN transistor also has a PNP counterpart, the MPSA56, making it perfect for push-pull and class B amplifier circuits. Aside from that, a transistor can be used to switch low-power devices.
Package-Type: TO-92 and Other Packages
Transistor Type: NPN
Max Collector Current(IC): 500mA
Max Collector-Emitter Voltage (VCE): 80V
Max Collector-Base Voltage (VCB): 80V
Max Emitter-Base Voltage (VEBO): 5V
Max Collector Dissipation (Pc): 625 mW
Max Transition Frequency (fT): 100 MHz
Minimum & Maximum DC Current Gain (hFE): 100
Max Storage & Operating temperature Should Be: -55 to +150 ℃
General-purpose switching
Class B amplifiers
Pre-amplifier circuits
Push-Pull configuration circuits
The equivalent for MPSA06:
2SC2882
BC387
2N4401
Switching Time Test Circuits
As previously stated, the MPSA06 is a general-purpose transistor that can be employed in a wide range of applications that fall within its parameters. It can drive loads of up to 500mA when used as a switch, such as relays, LEDs, high-power transistors, ICs, and other circuit components. It can, however, be utilized as an amplifier in audio amplifier circuits as well as for other electrical signal amplification. Because the transistor's transition frequency is 100MHz, it can also be employed in RF circuits below that frequency.
We always recommend using a component at least 20% below its maximum ratings to get long-term performance, and the MPSA06 transistor is no exception. Because the transistor's maximum collector current is 500mA, do not drive loads that draw more than 400mA, and the maximum load voltage should be less than 64V. Always use a proper base resistor with the transistor and do not store or operate it at temperatures below -55 degrees Celsius and above +150 ℃.
MPSA06 Package
On Semiconductor (Nasdaq: ON) is a manufacturer engaging itself in reducing energy use. It features a comprehensive portfolio of power, signal management, and logic, custom solutions that are energy efficient. It acts as a world-class supply chain with high reliability and a network of manufacturing facilities, sales, offices, and design centres in key markets through North America, Europe, and the Asia Pacific regions.
ON Semiconductor MPSA06 technical specifications, attributes, parameters and parts with similar specifications to ON Semiconductor MPSA06.
ON Semiconductor MPSA06 technical specifications, attributes, parameters and parts with similar specifications to ON Semiconductor MPSA06.
| Product Attribute | Attribute Value | |
|---|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) | |
| Factory Lead Time | 12 Weeks | |
| Mount | Through Hole | |
| Mounting Type | Through Hole | |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) | |
| Number of Pins | 3Pins | |
| Supplier Device Package | TO-92-3 | |
| Weight | 201mg | |
| Collector-Emitter Breakdown Voltage | 80V | |
| Collector-Emitter Saturation Voltage | 250mV | |
| Current-Collector (Ic) (Max) | 500mA | |
| Number of Elements | 1 Element | |
| hFEMin | 100 | |
| Operating Temperature | -55°C~150°C TJ | |
| Packaging | Bulk | |
| Published | 2007 | |
| Part Status | Active |
| Product Attribute | Attribute Value | |
|---|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | |
| Termination | Through Hole | |
| Max Operating Temperature | 150°C | |
| Min Operating Temperature | -55°C | |
| Voltage - Rated DC | 80V | |
| Max Power Dissipation | 625mW | |
| Current Rating | 500mA | |
| Frequency | 100MHz | |
| Base Part Number | MPSA06 | |
| Polarity | NPN | |
| Element Configuration | Single | |
| Power Dissipation | 625mW | |
| Power - Max | 625mW | |
| Gain Bandwidth Product | 100MHz | |
| Transistor Type | NPN | |
| Collector Emitter Voltage (VCEO) | 80V | |
| Max Collector Current | 500mA |
| Product Attribute | Attribute Value | |
|---|---|---|
| DC Current Gain (hFE) (Min) @ Ic, Vce | 100 @ 100mA 1V | |
| Current - Collector Cutoff (Max) | 100nA | |
| Vce Saturation (Max) @ Ib, Ic | 250mV @ 10mA, 100mA | |
| Voltage - Collector Emitter Breakdown (Max) | 80V | |
| Max Frequency | 100MHz | |
| Frequency - Transition | 100MHz | |
| Collector Base Voltage (VCBO) | 80V | |
| Emitter Base Voltage (VEBO) | 4V | |
| Height | 5.33mm | |
| Length | 5.21mm | |
| Width | 4.19mm | |
| REACH SVHC | No SVHC | |
| Radiation Hardening | No | |
| RoHS Status | ROHS3 Compliant | |
| Lead Free | Lead Free |
Download datasheets and manufacturer documentation for ON Semiconductor MPSA06.
Download datasheets and manufacturer documentation for MPSA06
TAGS
Comments