Transistors - Bipolar (BJT) - Single TRANSISTOR TO-92 S9015 is a well-known PNP silicon BJT transistor. This transistor is mainly designed for low gain signal amplification.
2298
Dec 1, 2021
Atwood Ella
Simple S9015 Transistor Audio Amplifier
Transistors - Bipolar (BJT) - Single TRANSISTOR TO-92
S9015 is a well-known PNP silicon BJT transistor. This transistor is mainly designed for low gain signal amplification. This article is going to describe pinout, specification, circuit, equivalents, and other details about the S9015 transistor.
S9015-C-AP
S9015 is a PNP type of Bipolar Transistor. This transistor is primarily used for the amplification of low-gain signals. When a low gain signal is amplified to a high gain signal, the noise associated with the signal is enhanced as well. However, this transistor has a low noise feature that filters the noise from the amplified signal, resulting in a low noise and high gain signal at the output. If a small few mill watt input signal is provided, the transistor's maximum collector dissipation is 400mW, which is enough to drive a small 2 to 3 inch 4Ohms or 8Ohms speaker directly.
Micro Commercial Co S9015-C-AP technical specifications, attributes, parameters and parts with similar specifications to Micro Commercial Co S9015-C-AP.
Micro Commercial Co S9015-C-AP technical specifications, attributes, parameters and parts with similar specifications to Micro Commercial Co S9015-C-AP.
| Product Attribute | Attribute Value | |
|---|---|---|
| Mounting Type | Through Hole | |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) Formed Leads | |
| Surface Mount | NO | |
| Transistor Element Material | SILICON | |
| Current-Collector (Ic) (Max) | 100mA | |
| Number of Elements | 1 Element | |
| Operating Temperature | -55°C~150°C TJ | |
| JESD-609 Code | e3 | |
| Pbfree Code | yes | |
| Part Status | Last Time Buy | |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Product Attribute | Attribute Value | |
|---|---|---|
| Number of Terminations | 3Terminations | |
| ECCN Code | EAR99 | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Position | BOTTOM | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Pin Count | 3 | |
| JESD-30 Code | O-PBCY-T3 | |
| Qualification Status | Not Qualified | |
| Configuration | SINGLE | |
| Power - Max | 450MW |
| Product Attribute | Attribute Value | |
|---|---|---|
| Polarity/Channel Type | PNP | |
| Transistor Type | PNP | |
| DC Current Gain (hFE) (Min) @ Ic, Vce | 200 @ 1mA 5V | |
| Current - Collector Cutoff (Max) | 50nA ICBO | |
| Vce Saturation (Max) @ Ib, Ic | 300mV @ 10mA, 100mA | |
| Voltage - Collector Emitter Breakdown (Max) | 45V | |
| Transition Frequency | 150MHz | |
| Frequency - Transition | 150MHz | |
| RoHS Status | ROHS3 Compliant |
Polarity: PNP
Maximum Collector Power Dissipation (Pc): 0.2 W
Maximum Collector-Base Voltage |Vcb|: 50 V
Maximum Collector-Emitter Voltage |Vce|: 45 V
Maximum Emitter-Base Voltage |Veb|: 5 V
Maximum Collector Current |Ic max|: 0.1 A
Max. Operating Junction Temperature (Tj): 150 °C
Transition Frequency (ft): 150 MHz
Forward Current Transfer Ratio (hFE), MIN: 200
S9014, MPSA18, 2N2907, S8550, 2N4403, BC527, SS9012, BC557C, NTE2672, BC327
Signal Amplifier
Hearing Aids
Darlington Pairs
Audio Preamplifiers
Audio Amplification Stages
Sensor Circuits
Switching loads under 100mA
The difference in Type
S9013 and S9014 are both NPN-type low-power plastic-encapsulated transistors, while S9015 is a PNP-type bipolar transistor.
The difference in Parameters
S9013 Parameters:
Type: Structure NPN
Collector-emitter voltage 25V
Collector-Base Voltage 45V
Emitter-Base Voltage 5V
Collector current Ic Max 0.5A
Dissipated power 0.625W
Operating temperature -55℃ ~ +150℃
Characteristic frequency 150MHz
Magnification D64-91 E78-122 F96-135 G122-166 H144-220 I190-300
The main use Amplifier circuit
S9014 and S9015 Parameters:
Collector maximum dissipation power PCM=0.4W (Tamb=25℃)
Collector maximum allowable current ICM=0.1A
Collector base breakdown voltage BVCBO=50V
Collector-emitter breakdown voltage BVCEO=45V
Emitter base breakdown voltage BVEBO=5V
Collector-emitter saturation voltage drop VCE (sat) =0.3V (IC=100mA; IB=5mA)
Base-emitter saturation voltage drop VBE (sat) =1V (IC=100mA; IB=5mA)
Characteristic frequency fT=150MHz
HFE: A=60~150; B=100~300; C=200~600; D=400~1000
The parameters of the transistors s9014 and s9015 are the same, but the conductivity polarity is the opposite.
The S9015 can be utilized for a wide range of applications, including audio preamplification, audio amplification, and signal amplification from low to high gain. It can also be used as a switch to control relays, LEDs, and high-power transistors, among other things. This transistor can be used and wired in the same way that any other BJT transistor can.
It is advised that you do not drive a load of more than 100mA and that the load voltage is less than 45V when using SS9015 in your circuits for long-term and good overall performance. Use a base resistor that provides the transistor with the needed input current, and always operate or store the transistor at a temperature between -55 and +150 degrees Celsius.
S9015 Dimensions Outline
Founded in 1991, Micro Commercial Components Corp. (MCC) is a manufacturer of high-quality discrete semiconductors to the consumer markets. MCC's products include diodes, rectifiers, transistors, MOSFETs, voltage regulators, and protection devices.
TAGS
Comments