ATTENTION: Due to increased demand and order volume, processing time may take an additional 1-3 business days.
HomeCommunitySubjectTL074 OP-AMP: Pinout, Datasheet and TL074 vs. TL084

TL074 OP-AMP: Pinout, Datasheet and TL074 vs. TL084

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps 14-SOIC (0.154, 3.90mm Width) J-FET 15V 0°C~70°C TL074 1.27mm IC OPAMP JFET 3MHZ 14SO

8494

Oct 24, 2021

Cora Arnold

Crossover 3-way Loud Speaker with TL074

 

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps 14-SOIC (0.154, 3.90mm Width) J-FET 15V 0°C~70°C TL074 1.27mm IC OPAMP JFET 3MHZ 14SO

The TL074 is a Quad Package Operational Amplifier. This post will unlock more details about TL074. There is a huge range of Semiconductors, Capacitors, Resistors and ICs in stock. Welcome RFQ.

TL074CDT

689In Stock
Min.: 1 Mult.: 1
Price not displayed? Not available to buy online? Please send an RFQ, and we will respond immediately.
Quick Links

TL074 Pinout

TL074 Pinout

 

Pin Number

Pin Name

Description

1,7,10,16

Op-Amp Output Pins

These are the output pins of the four Op-Amps

2,6,11,15

Input Inverting Pins

These are the input inverting pins of the four Op-Amps

3,5,12,14

Input Non-Inverting Pins

These are the input non-inverting pins of the four Op-Amps

4

Vcc (+)

Positive Supply Rail of the Op-Amp

13

Vcc (-)

Negative Supply Rail of the Op-Amp

TL074 CAD Model

TL074CDT Symbol

 

TL074 Footprint

 

TL074 3D Model

TL074 Description

The TL074 is a high-speed JFET input single operational amplifier. Each of these JFET input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.

TL074 Feature

• Wide common-mode (up to VCC+) and differential voltage range 

• Low input bias and offset current 

• Low noise en = 15 nV/ √Hz (typ) 

• Output short-circuit protection 

• High input impedance JFET input stage 

• Low harmonic distortion: 0.01% (typical) 

• Internal frequency compensation 

• Latch-up free operation 

• High slew rate: 16 V/µs (typical)

TL074 Application

  • Circuit requiring high input impedance

  • Buffer application

  • Filter circuits, Voltage followers

  • Integrator, Differentiator, Summer, adder, Voltage follower, etc.,

  • DC gain blocks

  • Comparators (Loop control & regulation)

TL074 Equivalent

The equivalent for TL074: 

  • LM324

TL074 Schematic

TL074 Schematic

Where to use TL074?

The TL074 is a Quad Package Operational Amplifier, which means it has four Op-Amps, each of which can be used separately.

Where to use TL074

The TL074 Op-Amp is distinguished by the use of high-voltage JFET and bipolar transistors, which allows the transistor to have a very high input impedance and low bias current. This Op-Amp also features low noise and harmonic distortion, making it excellent for audio preamplifiers. So, if you're seeking a JFET-driven Op-Amp IC with Quad packaging, this IC might be the one for you.

How to use TL074?

The TL074 Op-Amp is extremely similar to the LM324 Op-Amp in that they both feature four Op-Amps and identical pinouts. However, because the TL074 contains a JFET, their characteristics differ slightly. If you're interested in learning about a couple of this IC's application circuits, you can read about how the LM324 is used, as both ICs have similar uses.

Specifications

STMicroelectronics TL074CDT technical specifications, attributes, parameters and parts with similar specifications to STMicroelectronics TL074CDT.

TL074CDT Tech Specifications

STMicroelectronics TL074CDT technical specifications, attributes, parameters and parts with similar specifications to STMicroelectronics TL074CDT.

Product Attribute Attribute Value
Lifecycle StatusACTIVE (Last Updated: 6 months ago)
Factory Lead Time10 Weeks
MountSurface Mount
Mounting TypeSurface Mount
Package / Case14-SOIC (0.154, 3.90mm Width)
Number of Pins14Pins
Operating Temperature0°C~70°C
PackagingCut Tape (CT)
SeriesAutomotive, AEC-Q100
JESD-609 Codee3
Part StatusActive
Moisture Sensitivity Level (MSL)1 (Unlimited)
Number of Terminations14Terminations
ECCN CodeEAR99
Terminal FinishMatte Tin (Sn) - annealed
Packing MethodTAPE AND REEL
Terminal PositionDUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel)260
Number of Functions4Functions
Product Attribute Attribute Value
Supply Voltage15V
Terminal Pitch1.27mm
Time@Peak Reflow Temperature-Max (s)30
Base Part NumberTL074
Pin Count14
Power Supplies+-15V
Number of Channels4Channels
Operating Supply Current1.4mA
Nominal Supply Current2.5mA
Power Dissipation680mW
Output Current40mA
Slew Rate13V/μs
ArchitectureVOLTAGE-FEEDBACK
Amplifier TypeJ-FET
Common Mode Rejection Ratio70 dB
Current - Input Bias20pA
Voltage - Supply, Single/Dual (±)6V~36V ±3V~18V
Output Current per Channel40mA
Input Offset Voltage (Vos)3mV
Neg Supply Voltage-Nom (Vsup)-15V
Product Attribute Attribute Value
Unity Gain BW-Nom3000 kHz
Voltage Gain106.02dB
Average Bias Current-Max (IIB)0.02μA
Low-OffsetNO
Frequency CompensationYES
Supply Voltage Limit-Max18V
Low-BiasYES
Bias Current-Max (IIB) @25C0.0002μA
Dual Supply Voltage9V
Neg Supply Voltage-Max (Vsup)-18V
Input Offset Current-Max (IIO)0.01μA
Height1.65mm
Length8.75mm
Width4mm
REACH SVHCNo SVHC
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead FreeLead Free
0 Products View Similar

TL074 Package

TL074 Package

TL074 Manufacturer

STMicroelectronics is a globally recognized semiconductor company. They are dedicated to developing semiconductor solutions for various microelectronics applications. STMicroelectronics enjoys unrivalled silicon and system expertise, strong manufacturing strength, IP portfolio, and solid relationships with their strategic partners. Based on these advantages, STMicroelectronics has become a pioneer in System-on-Chip (SoC) technology and its products have a positive effect in realizing today's convergence trends.

Datasheet PDF

TL074CDT Documents

Download datasheets and manufacturer documentation for TL074CDT

Frequently Asked Questions

What is TL074?
The TL074 is a high-speed JFET input single operational amplifier. Each of these JFET input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.
Is TL074 a rail to rail Op-Amp?
Output: The TL074 is not a rail to rail Op-Amp hence the output voltage will not reach the maximum positive or maximum negative voltage when saturated.
How much voltage to turn on tl074 op-amp?
Voltage - Supply, Single/Dual: (±)6V~36V ±3V~18V.
What does an op amp do?
An operational amplifier is an integrated circuit that can amplify weak electric signals. An operational amplifier has two input pins and one output pin. Its basic role is to amplify and output the voltage difference between the two input pins.
FAQ
What is TL074?
The TL074 is a high-speed JFET input single operational amplifier. Each of these JFET input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.
Is TL074 a rail to rail Op-Amp?
Output: The TL074 is not a rail to rail Op-Amp hence the output voltage will not reach the maximum positive or maximum negative voltage when saturated.
How much voltage to turn on tl074 op-amp?
Voltage - Supply, Single/Dual: (±)6V~36V ±3V~18V.
What does an op amp do?
An operational amplifier is an integrated circuit that can amplify weak electric signals. An operational amplifier has two input pins and one output pin. Its basic role is to amplify and output the voltage difference between the two input pins.

TAGS

Share